Pattern conveyor belt maintenance:

During transportation and storage, pattern conveyor belt should be kept clean and avoid direct sunlight or rain and snow, prevent contact with acids, alkalis, oils, organic solvents and other substances, and keep one meter away from heating devices. The warehouse temperature should be kept between 18-40 ℃ and the relative humidity should be kept between 50-80% during storage.

During storage, pattern conveyor belts must be placed in rolls and must not be folded. They should be turned over once a season during storage. Conveyor belts of different types and specifications should not be connected together for use, and their joints should preferably be glued. The type, structure, specification and number of layers of conveyor belts should be reasonably selected according to the conditions of use.

The running speed of the conveyor belt should generally not be greater than 2.5 m/s. Materials with large block size and high abrasiveness and fixed unloading devices should be used at a low speed as much as possible. The relationship between the diameter of the conveyor's drive roller and the conveyor belt layer, the matching of the drive roller and the redirecting roller, and the requirements for the roller groove angle should be reasonably selected according to the design regulations of the conveyor. The feeding direction should be along the running direction of the conveyor belt. In order to reduce the impact of the material on the conveyor belt when it falls, a chute should be used to reduce the material falling distance; The pattern conveyor belt receiving section should shorten the roller spacing and use buffer rollers to leak materials. The belt should use a soft and moderate baffle plate to prevent the baffle plate from being too hard and scratching the belt surface of the conveyor belt.

Precautions for using pattern conveyor belts: With the popularity of conveyor belts in industrial production, multiple varieties, high performance, lightweight, multi-function and long life are several aspects that manufacturers pay attention to.

In industrial production, it is particularly important to use the pattern conveyor belt correctly. The following points should be noted when using the pattern conveyor belt:

1. Avoid the rollers being covered by materials, causing poor rotation, prevent leakage from getting stuck between the roller and the belt, pay attention to the lubrication of the moving parts of the conveyor belt, but do not oil the conveyor belt;

2. Prevent the conveyor belt from starting under load;

3. If the conveyor belt deviates, timely measures should be taken to correct it;

4. When the conveyor belt is found to be partially damaged, it should be repaired in time with artificial cotton to avoid expansion;

5. Avoid the conveyor belt from being blocked by the frame, pillars or block materials to prevent it from being broken and torn.