Pattern Conveyor Belt is an angle conveyor belt composed of a patterned cover rubber on the working surface and a flat cover rubber on the non-working surface and a belt core.

Features of pattern conveyor belt:

1. Belt core material: ordinary cotton canvas (CC), polyester-cotton blended canvas (CP), nylon (NN), polyester (EP), etc.

2. Band width: 300-800mm.

3. Pattern height: 5, 10, 15, 20mm Note: The pattern shape can be designed according to user requirements.

4. Features: Suitable for conveying materials with an inclination of 0-40° to prevent materials from sliding down.

The commonly used pattern conveyor belts are explained in detail as follows:

1. Features of herringbone pattern conveyor belt: There is a "herringbone" pattern on the belt surface that is higher than the belt body. The pattern can be open or closed, and each pattern can be divided into three types: high, medium, and low. Uses: Suitable for conveying powder, granular, small pieces of materials with an inclination angle of ≤40 degrees, and can also convey bagged materials.

2. Characteristics of stripe patterns: There are stripe patterns on the belt surface that are higher than the belt body. The patterns are divided into three types: high, medium and low. Each pattern can be divided into sparse and dense forms according to the arrangement spacing. Uses: Suitable for horizontal conveying of packaging materials with an inclination angle of ≤30 degrees. If it is in the form of a groove, it can replace the herringbone pattern.

3. Characteristics of granular patterns: There are granular patterns on the belt surface that are higher than the belt body or embedded in the belt body. The pits can also be made into square holes, prisms and cloth patterns. Uses: Convex granular patterns are suitable for conveying soft packaging or materials that require grip (such as cardboard boxes) or non-slip conveying.

4. Concave pit granular pattern conveyor belt: Suitable for conveying granular materials with an inclination angle of ≤45 degrees.

5. Characteristics of fan-shaped patterns: There are semi-fan-shaped (or 1/4 circular) patterns on the surface of the conveyor belt. When the belt is grooved, the pattern is fan-shaped (or semicircular), which belongs to the high pattern category.

Application: Suitable for conveying powder, granules and block materials at a large inclination angle of ≤45 degrees.

Lawn pattern, fishbone pattern, diamond pattern, cross pattern, mesh pattern, inverted triangle pattern, horseshoe pattern, sawtooth pattern, small dot pattern, diamond pattern, snakeskin pattern, cloth pattern, large round table pattern, wave pattern, washboard pattern, straight pattern, fine straight stripe pattern, golf pattern, large square pattern, matte pattern, coarse texture pattern, plaid pattern, etc. are suitable for different working environments and different performance requirements in the industrial field.

Composition and variety:

Composition:

Pattern conveyor belt consists of two parts: base belt and pattern.

Common varieties:

Due to different transported materials and different conveying angles, different pattern shapes and heights are required.

Commonly used types include: herringbone, figure eight, fishbone, U-shaped, cylindrical, pitted, etc. Or designed according to user requirements, suitable for pattern conveyor belts of powder, granular, and block materials with an inclination angle of less than 30 degrees.