The corrugated conveyor belt is installed with corrugated skirts on both sides of the base belt to prevent the material from falling off the belt, thereby increasing the amount of conveyed material. The existing conveyor belt skirts are mostly made of rubber. During the material conveying process, if the overall bending performance is not good, it is easy to be torn, resulting in a relatively short overall service life. So how can we prolong the service life of the skirt of the corrugated conveyor belt?

In order to solve the above problems, we can solve them by increasing the tensile and tearing resistance at the skirt of the corrugated conveyor belt. The main operation is to connect the corrugated belt to the bottom plate of the skirt at the skirt of the corrugated conveyor belt. One or more layers of twill fiber cloth are sandwiched in the corrugated tape. The reinforcement block with plastic or metal material can be connected with screws outside the connection hole of the lower partition of the skirt. We can use twill fiber canvas, which has good elasticity and tensile resistance, and can prolong the service life of the belt body.

Secondly, in order to extend the service life of the skirt of the sidewall conveyor belt, we should pay attention to the prohibition of using different corrugated belts to transport materials during use. The direction of the transported materials and the speed of the materials falling should be consistent with the direction and speed of the belt. The machine must be started empty to avoid motor overload and slipping of the large-angle conveyor belt, and all materials must be unloaded before stopping. When using corrugated belt, in order to prevent folding and hard objects from pressing each other, the conveyor belt should be curled for use and storage. The tension of the corrugated belts should not be too large, and it should be used under the minimum tension. If the skirt conveyor belt slips or cannot be pulled during use, the fault should be eliminated in time, the tensioning system should be adjusted, and the tensioning device should be kept flexible.

The above is the method to extend the service life of the corrugated belt skirt. The corrugated corrugated belt produced by our company can withstand extremely high stress and repeated bending in high-capacity and large-angle transportation. The corrugated belts are specially designed by professional engineers of our company. They use high-quality, extremely low-elongation fabrics to provide higher rigidity values. This product has been highly praised in the industry and has now received unanimous praise. Welcome your consultation.